Changing the locks on day one is only the start. Over the months a vacant property sits in a servicer's portfolio, inspectors, preservation crews, contractors, agents and buyers all need to get in, and the wrong people keep trying. Managing that access well is an ongoing part of property preservation, and it starts with a simple question every crew faces at the door: rekey or replace?
Rekeying vs. Replacing: How to Decide
Rekeying changes the internal pins of an existing lock so it works with a new key. Replacing means installing a new lock set entirely. Both put access back under the servicer's control, but they fit different situations.
Rekeying usually makes sense when:
- The existing lock is in good working condition
- The hardware is compatible with the servicer's key code
- The door and frame are solid and undamaged
Replacement is usually the better choice when:
- The lock is broken, worn, rusted or tampered with
- The hardware can't be rekeyed to the required code
- A previous break-in damaged the cylinder or latch
- The servicer's guidelines call for new hardware
Whatever the decision, the crew should record which locks were rekeyed and which were replaced, with photos of each. Our post on initial secures and lock changes covers how this fits into the first visit.
Working With Servicer Key Codes
Most mortgage servicers assign standard key codes so that authorized vendors and agents can access properties without keys being copied and passed around. Following the right code exactly matters. A lock set to the wrong code means a return trip, delayed inspections and frustrated listing agents.
Before leaving any property, crews should test every rekeyed or replaced lock with the correct key and confirm it in the work order notes. When a servicer changes its code requirements, every affected property should be updated and documented.
Lockbox Management
Lockboxes give authorized people a way in without handing out keys. To work as intended, they need to be managed, not just installed:
- Place lockboxes where they are accessible but not easily tampered with
- Use the code or key type the servicer specifies
- Confirm the correct key is inside after every visit
- Report missing, damaged or forced lockboxes right away
A missing key or broken lockbox can lock out the next inspector, so these checks belong on every visit, not just the first.
Keeping Access Logs
On vacant properties, knowing who went in and when is part of protecting the asset. Work order records, time-stamped photos and visit notes together create an access history. If damage or missing items are reported, that history helps the servicer understand what happened and when.
At Superior Repairs, every assignment is tracked through Pro Dispatch Hub, which keeps visit dates, notes and photos tied to each property so the record is easy to review.
Re-Securing After a Break-In
Break-ins happen on vacant properties, and the response should be quick and thorough. A typical re-secure includes:
- Photographing the point of entry and any damage before work begins
- Checking the full property for additional openings or signs of occupancy
- Rekeying or replacing compromised locks to the servicer's code
- Securing broken windows or doors with temporary measures when needed
- Reporting the incident and any damage to the servicer with photos and a repair bid
Fast re-securing limits further damage and shows the servicer the property is back under control.
Damaged Doors and Frames
A new lock is only as strong as the door it's installed on. Split frames, damaged strike plates and hollow or broken doors can make a lock useless. When crews find this kind of damage, they should secure the opening as well as possible, document it clearly and submit a bid so the servicer can approve a proper repair.
Access Control You Can Rely On
Superior Repairs has handled lock changes, rekeys and re-secures as part of our property preservation services since 2011, across all fifty states and Puerto Rico, with photo documentation on every order.
If you're looking for a preservation contractor who treats access control as an ongoing responsibility, we'd welcome the conversation. Learn more about our services or get in touch with our team.
